87524467 - DIA KIT, HARVESTER - CASE IH
Part # 87524467
DELIVERY INFO
Package Quantity
- 1
This Kit includes the following parts:
-
WASHER2
-
Belleville Lock Washer - 10mm ID x 22mm OD x 1.6mm Thick12
-
Belleville Washer - 27 mm OD x 1.8 mm Thk61
-
Washer - 5.5 mm ID x 18 mm OD x 2 mm Thk4
-
Pop Rivet - 0.187" OD x 0.575" L4
-
SCREW8
-
Bolt8
-
Hex Nut - M10 x 1.53
-
Standard Hex Lock Nut - M122
-
Lock Nut - Class 8 - M10 x 1.52
-
Hex Bolt - Cl 8.8 - M8 x 7012
-
Hex Screw - Cl 8.8 - Full Thread6
-
External Snap Ring - M194
-
BOLT4
-
Pop Rivet - 4.8 mm OD x 11.2 mm L4
-
Hex Bolt - Cl 8.8 - Full Thread - M6 x 162
-
BOLT, CARRIAGE6
-
Hex Nut - 12 mm D11
-
Hex Bolt - Full Thread - M12 x 1.75 x 30 mm L12
-
Hex Bolt - Cl 8.8 - Full Thread - M10 x 1.5 x 356
-
Grain Pan Drive2
-
NUT1
-
Lock Nut32
-
WASHER2
-
WASHER, BELLEVILLE4
-
Belleville Washer - 14 mm OD x 1.3 mm Thk30
-
Belleville Lock Washer - M8 Bolt Size x 18mm OD x 1.4mm Thick90
-
BOLT4
-
BOLT4
-
SUPPORT1
-
SUPPORT1
-
SUPPORT1
-
WASHER2
-
SUPPORT1
-
Hex Bolt - Cl 8.8 - M12 x 1806
-
Rubber Bushing - 21 mm ID x 40 mm OD x 38 mm L2
-
Wire Tie Base - 15.87mm W x 22.22mm OAL x 9.9mm Thick7
-
WASHER4
-
BOLT2
-
Hex Lock Nut - M6 x 123
-
Hex Bolt - Full Thread - M12 x 1.75 x 40 mm L10
-
Hose Clamp - Worm Gear - Stainless Steel - 57 mm-79 mm Dia7
-
PLATE2
-
External Snap Ring - 95.04 mm ID x 3 mm Thk2
-
CIRCLIP2
-
WASHER2
-
WASHER2
-
WASHER1
-
BOLT1
-
Canvas - 1985 mm L x 90 mm W x 4.76 mm Thk2
-
BOLT20
-
SCREW, HEX SOC4
-
Pop Rivet - 6.28 mm OD x 19.5 mm L18
-
Rod - Zinc-Plated - 1722 mm L1
-
Upper Shaker Shoe Handle - Zinc-Plated - 145 mm L x 87 mm H x 3 mm W1
-
PLATE1
-
Wear Plate1
-
Rubber Bushing - 28 mm ID x 52 mm OD x 54 mm L1
-
Seal Kit2
-
PLATE2
-
Rubber Bushing - 14 mm ID x 40 mm OD x 38 mm L8
-
Washer - 9 mm ID x 28 mm OD x 3 mm Thk8
-
Grain Pan Bracket - 60 mm L x 20 mm W x 3.25 mm Thk2
-
Ball Joint2
-
BOLT4
-
Powershift Transmission Shaft4
-
WASHER, BELLEVILLE6
-
Hex Lock Nut - Non-Directional - 1/2"-1324
-
Bushing - 16.2mm ID x 35mm OD x 52mm L2
-
Canvas - 2010 mm L x 80 mm W x 3 mm Thk2
-
Mounting Plate - 20 mm W x 1970 mm OAL x 1.65 mm Thk2
-
BUSHING2
-
Mounting Plate - Front Corner2
-
Hex Nut - Cl 10 - M8 x 1.2524
-
Left-Hand Arm1
-
Right-Hand Arm1
-
SPACER2
-
Pop Rivet - 4.8 mm OD x 18 mm L85
-
SHIM2
-
SHIM1
-
Deep Groove Ball Bearing - 6020-2RS1/C3 - 100 mm ID x 150 mm OD x 24 mm W2
-
Eccentric1
-
Plate2
-
Arm Assembly2
-
Rear Seal Mount Support2
-
Securing Strip - 20mm W x 1340mm OAL x 1.65mm Thk2
-
Canvas Belt2
-
SUPPORT1
-
Apron - 215 mm L x 156 mm W2
-
Bracket1
-
BRACKET1
-
BRACKET1
-
SEAL PROTECTION2
-
Hex Socket Screw - Flat Countersunk - Cl 8.8 - M6 x 166
-
Spacer2
-
Support2
-
Bushing2
-
Upper Shaker Shoe Arm - 282 mm L x 105 mm H2
-
Hex Nut - M6 x 112
This Kit includes the following parts:
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
This Kit includes the following parts:
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
This Kit includes the following parts:
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
There are no fitments for this product.
-
Model Name -
EQUIPMENT FITMENT -
Product Type -
Product Line
Check fitment and access technical drawings #87524467
Designed to guarantee top performance in all weather conditions, choose Alternator #84141452 for your tractor and harvesting equipment
High Power
- New generation able to supply high eleltrical demand
- optimal charging speed at all temperatures
Maintenance Free
- Superior design to ensure long lifespan with zero maintenance
High Power
- New generation able to supply high eleltrical demand
- optimal charging speed at all temperatures
Maintenance Free
- Superior design to ensure long lifespan with zero maintenance
Package Quantity
- 1
This Kit includes the following parts:
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
This Kit includes the following parts:
-
Part NumberDescriptionWASHER.Quantity2
-
Part NumberDescriptionBelleville Lock Washer - 10mm ID x 22mm OD x 1.6mm Thick.Quantity12
-
Part NumberDescriptionBelleville Washer - 27 mm OD x 1.8 mm Thk.Quantity61
-
Part NumberDescriptionWasher - 5.5 mm ID x 18 mm OD x 2 mm Thk.Quantity4
-
Part NumberDescriptionPop Rivet - 0.187" OD x 0.575" L.Quantity4
-
Part NumberDescriptionSCREW.Quantity8
-
Part NumberDescriptionBolt.Quantity8
-
Part NumberDescriptionHex Nut - M10 x 1.5.Quantity3
-
Part NumberDescriptionStandard Hex Lock Nut - M12.Quantity2
-
Part NumberDescriptionLock Nut - Class 8 - M10 x 1.5.Quantity2
-
Part NumberDescriptionHex Bolt - Cl 8.8 - M8 x 70.Quantity12
-
Part NumberDescriptionHex Screw - Cl 8.8 - Full Thread.Quantity6
-
Part NumberDescriptionExternal Snap Ring - M19.Quantity4
-
Part NumberDescriptionBOLT.Quantity4
-
Part NumberDescriptionPop Rivet - 4.8 mm OD x 11.2 mm L.Quantity4
-
Part NumberDescriptionHex Bolt - Cl 8.8 - Full Thread - M6 x 16.Quantity2
-
Part NumberDescriptionBOLT, CARRIAGE.Quantity6
-
Part NumberDescriptionHex Nut - 12 mm D.Quantity11
-
Part NumberDescriptionHex Bolt - Full Thread - M12 x 1.75 x 30 mm L.Quantity12
-
Part NumberDescriptionHex Bolt - Cl 8.8 - Full Thread - M10 x 1.5 x 35.Quantity6
-
Part NumberDescriptionGrain Pan Drive.Quantity2
-
Part NumberDescriptionNUT.Quantity1
-
Part NumberDescriptionLock Nut.Quantity32
-
Part NumberDescriptionWASHER.Quantity2
-
Part NumberDescriptionWASHER, BELLEVILLE.Quantity4
-
Part NumberDescriptionBelleville Washer - 14 mm OD x 1.3 mm Thk.Quantity30
-
Part NumberDescriptionBelleville Lock Washer - M8 Bolt Size x 18mm OD x 1.4mm Thick.Quantity90
-
Part NumberDescriptionBOLT.Quantity4
-
Part NumberDescriptionBOLT.Quantity4
-
Part NumberDescriptionSUPPORT.Quantity1
-
Part NumberDescriptionSUPPORT.Quantity1
-
Part NumberDescriptionSUPPORT.Quantity1
-
Part NumberDescriptionWASHER.Quantity2
-
Part NumberDescriptionSUPPORT.Quantity1
-
Part NumberDescriptionHex Bolt - Cl 8.8 - M12 x 180.Quantity6
-
Part NumberDescriptionRubber Bushing - 21 mm ID x 40 mm OD x 38 mm L.Quantity2
-
Part NumberDescriptionWire Tie Base - 15.87mm W x 22.22mm OAL x 9.9mm Thick.Quantity7
-
Part NumberDescriptionWASHER.Quantity4
-
Part NumberDescriptionBOLT.Quantity2
-
Part NumberDescriptionHex Lock Nut - M6 x 1.Quantity23
-
Part NumberDescriptionHex Bolt - Full Thread - M12 x 1.75 x 40 mm L.Quantity10
-
Part NumberDescriptionHose Clamp - Worm Gear - Stainless Steel - 57 mm-79 mm Dia.Quantity7
-
Part NumberDescriptionPLATE.Quantity2
-
Part NumberDescriptionExternal Snap Ring - 95.04 mm ID x 3 mm Thk.Quantity2
-
Part NumberDescriptionCIRCLIP.Quantity2
-
Part NumberDescriptionWASHER.Quantity2
-
Part NumberDescriptionWASHER.Quantity2
-
Part NumberDescriptionWASHER.Quantity1
-
Part NumberDescriptionBOLT.Quantity1
-
Part NumberDescriptionCanvas - 1985 mm L x 90 mm W x 4.76 mm Thk.Quantity2
-
Part NumberDescriptionBOLT.Quantity20
-
Part NumberDescriptionSCREW, HEX SOC.Quantity4
-
Part NumberDescriptionPop Rivet - 6.28 mm OD x 19.5 mm L.Quantity18
-
Part NumberDescriptionRod - Zinc-Plated - 1722 mm L.Quantity1
-
Part NumberDescriptionUpper Shaker Shoe Handle - Zinc-Plated - 145 mm L x 87 mm H x 3 mm W.Quantity1
-
Part NumberDescriptionPLATE.Quantity1
-
Part NumberDescriptionWear Plate.Quantity1
-
Part NumberDescriptionRubber Bushing - 28 mm ID x 52 mm OD x 54 mm L.Quantity1
-
Part NumberDescriptionSeal Kit.Quantity2
-
Part NumberDescriptionPLATE.Quantity2
-
Part NumberDescriptionRubber Bushing - 14 mm ID x 40 mm OD x 38 mm L.Quantity8
-
Part NumberDescriptionWasher - 9 mm ID x 28 mm OD x 3 mm Thk.Quantity8
-
Part NumberDescriptionGrain Pan Bracket - 60 mm L x 20 mm W x 3.25 mm Thk.Quantity2
-
Part NumberDescriptionBall Joint.Quantity2
-
Part NumberDescriptionBOLT.Quantity4
-
Part NumberDescriptionPowershift Transmission Shaft.Quantity4
-
Part NumberDescriptionWASHER, BELLEVILLE.Quantity6
-
Part NumberDescriptionHex Lock Nut - Non-Directional - 1/2"-13.Quantity24
-
Part NumberDescriptionBushing - 16.2mm ID x 35mm OD x 52mm L.Quantity2
-
Part NumberDescriptionCanvas - 2010 mm L x 80 mm W x 3 mm Thk.Quantity2
-
Part NumberDescriptionMounting Plate - 20 mm W x 1970 mm OAL x 1.65 mm Thk.Quantity2
-
Part NumberDescriptionBUSHING.Quantity2
-
Part NumberDescriptionMounting Plate - Front Corner.Quantity2
-
Part NumberDescriptionHex Nut - Cl 10 - M8 x 1.25.Quantity24
-
Part NumberDescriptionLeft-Hand Arm.Quantity1
-
Part NumberDescriptionRight-Hand Arm.Quantity1
-
Part NumberDescriptionSPACER.Quantity2
-
Part NumberDescriptionPop Rivet - 4.8 mm OD x 18 mm L.Quantity85
-
Part NumberDescriptionSHIM.Quantity2
-
Part NumberDescriptionSHIM.Quantity1
-
Part NumberDescriptionDeep Groove Ball Bearing - 6020-2RS1/C3 - 100 mm ID x 150 mm OD x 24 mm W.Quantity2
-
Part NumberDescriptionEccentric.Quantity1
-
Part NumberDescriptionPlate.Quantity2
-
Part NumberDescriptionArm Assembly.Quantity2
-
Part NumberDescriptionRear Seal Mount Support.Quantity2
-
Part NumberDescriptionSecuring Strip - 20mm W x 1340mm OAL x 1.65mm Thk.Quantity2
-
Part NumberDescriptionCanvas Belt.Quantity2
-
Part NumberDescriptionSUPPORT.Quantity1
-
Part NumberDescriptionApron - 215 mm L x 156 mm W.Quantity2
-
Part NumberDescriptionBracket.Quantity1
-
Part NumberDescriptionBRACKET.Quantity1
-
Part NumberDescriptionBRACKET.Quantity1
-
Part NumberDescriptionSEAL PROTECTION.Quantity2
-
Part NumberDescriptionHex Socket Screw - Flat Countersunk - Cl 8.8 - M6 x 16.Quantity6
-
Part NumberDescriptionSpacer.Quantity2
-
Part NumberDescriptionSupport.Quantity2
-
Part NumberDescriptionBushing.Quantity2
-
Part NumberDescriptionUpper Shaker Shoe Arm - 282 mm L x 105 mm H.Quantity2
-
Part NumberDescriptionHex Nut - M6 x 1.Quantity12
This Kit includes the following parts:
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
This Kit includes the following parts:
-
TypeKitPart NumberDescriptionDia Kit, Harvester.
-
TypeKitPart NumberDescriptionDia Kit, Harvester.
-
TypeKitPart NumberDescriptionDia Kit, Harvester.
-
TypeKitPart NumberDescriptionDia Kit, Harvester.
-
TypeKitPart NumberDescriptionDia Kit, Harvester.
There are no fitments for this product.
Check fitment and access technical drawings #87524467
DELIVERY INFO
Qty
Please select a dealer to view prices and stock information.