86532078 - MESSER - CASE IH

Teilenummer 86532078

Passt dieses Teil zu meiner Maschine

LIEFERINFORMATIONEN

Bitte einen Händler auswählen, um die Lieferoptionen anzuzeigen

Rotary Disc Mower Knife #86532078 features a "V" knife. Our "V" knives are recommended for rocky conditions where excessive knife bending is a concern. Their cutting quality is not as good as twisted knives, but they have greater resistance to bending when they come into contact with foreign objects.

• Edge: Smooth
• Length: 110 mm
• Width: 50 mm
• Tip to Hole Center: 87 mm
• Bolt Hole Diameter: 22.75 mm

From raw material specification to the last production process, extra care has been taken to assure optimum performance and durability.

• The cutting edge is milled, not rolled, for improved sharpness. The milled edge does not extend past the bolt holes, for increased strength
• The new, radial-twist design improves lifting action for a smoother cut
• Disc knives are austempered for better impact absorption

Every production lot is tested against ISO specifications, then the manufacturing and testing processes are verified by stamping a traceable sequential number on each knife. In addition, tests are performed to satisfy standards that exceed ISO requirements.

• Incoming material is inspected, then tagged for traceability
• Bend tests are performed to guard against cracking
• Impact tests are used to check structural integrity
• Cross section analysis assures optimum metallurgical grain structure

Paketgewicht:
  • 0.152 kg
Paketlänge:
  • 204 mm
Paketbreite:
  • 128 mm
Pakethöhe:
  • 136 mm
Verpackungseinheit
  • 1


• Edge: Smooth
• Length: 110 mm
• Width: 50 mm
• Tip to Hole Center: 87 mm
• Bolt Hole Diameter: 22.75 mm

From raw material specification to the last production process, extra care has been taken to assure optimum performance and durability.

• The cutting edge is milled, not rolled, for improved sharpness. The milled edge does not extend past the bolt holes, for increased strength
• The new, radial-twist design improves lifting action for a smoother cut
• Disc knives are austempered for better impact absorption

Every production lot is tested against ISO specifications, then the manufacturing and testing processes are verified by stamping a traceable sequential number on each knife. In addition, tests are performed to satisfy standards that exceed ISO requirements.

• Incoming material is inspected, then tagged for traceability
• Bend tests are performed to guard against cracking
• Impact tests are used to check structural integrity
• Cross section analysis assures optimum metallurgical grain structure">Rotary Disc Mower Knife #86532078 features a "V" knife. Our "V" knives are recommended for rocky conditions where excessive knife bending is a concern. Their cutting quality is not as good as twisted knives, but they have greater resistance to bending when they come into contact with foreign objects.

• Edge: Smooth
• Length: 110 mm
• Width: 50 mm
• Tip to Hole Center: 87 mm
• Bolt Hole Diameter: 22.75 mm

From raw material specification to the last production process, extra care has been taken to assure optimum performance and durability.

• The cutting edge is milled, not rolled, for improved sharpness. The milled edge does not extend past the bolt holes, for increased strength
• The new, radial-twist design improves lifting action for a smoother cut
• Disc knives are austempered for better impact absorption

Every production lot is tested against ISO specifications, then the manufacturing and testing processes are verified by stamping a traceable sequential number on each knife. In addition, tests are performed to satisfy standards that exceed ISO requirements.

• Incoming material is inspected, then tagged for traceability
• Bend tests are performed to guard against cracking
• Impact tests are used to check structural integrity
• Cross section analysis assures optimum metallurgical grain structure

Dieses Kit beinhaltet folgende Teile:

Teilenummer
Beschreibung
Menge

Dieses Kit beinhaltet folgende Teile:

  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3

Dieses Kit beinhaltet folgende Teile:

  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3

Dieser Montagesatz beinhaltet folgende Teile:

Typ
Teilenummer
Beschreibung

Dieser Montagesatz beinhaltet folgende Teile:

  • Typ
    Kit
    Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Typ
    Kit
    Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Typ
    Kit
    Teilenummer
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Typ
    Kit
    Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Typ
    Kit
    Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Typ
    Kit
    Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.

Keine Anwendbarkeit für aktuelles Produkt

    Prüfen Sie die Anwendbarkeit und greifen Sie auf technische Zeichnungen zu: #86532078

  • Modellname
  • ANWENDUNG
  • Produkttyp
  • Produktlinie

Designed to guarantee top performance in all weather conditions, choose Alternator #84141452 for your tractor and harvesting equipment

High Power
  • New generation able to supply high eleltrical demand
  • optimal charging speed at all temperatures
Maintenance Free
  • Superior design to ensure long lifespan with zero maintenance
High Power
  • New generation able to supply high eleltrical demand
  • optimal charging speed at all temperatures
Maintenance Free
  • Superior design to ensure long lifespan with zero maintenance
warning-logo
WARNUNG

For California Residents Only:

Krebs und reproduktive Schäden https://www.p65warnings.ca.gov

Rotary Disc Mower Knife #86532078 features a "V" knife. Our "V" knives are recommended for rocky conditions where excessive knife bending is a concern. Their cutting quality is not as good as twisted knives, but they have greater resistance to bending when they come into contact with foreign objects.

• Edge: Smooth
• Length: 110 mm
• Width: 50 mm
• Tip to Hole Center: 87 mm
• Bolt Hole Diameter: 22.75 mm

From raw material specification to the last production process, extra care has been taken to assure optimum performance and durability.

• The cutting edge is milled, not rolled, for improved sharpness. The milled edge does not extend past the bolt holes, for increased strength
• The new, radial-twist design improves lifting action for a smoother cut
• Disc knives are austempered for better impact absorption

Every production lot is tested against ISO specifications, then the manufacturing and testing processes are verified by stamping a traceable sequential number on each knife. In addition, tests are performed to satisfy standards that exceed ISO requirements.

• Incoming material is inspected, then tagged for traceability
• Bend tests are performed to guard against cracking
• Impact tests are used to check structural integrity
• Cross section analysis assures optimum metallurgical grain structure

Paketgewicht:
  • 0.152 kg
Paketlänge:
  • 204 mm
Paketbreite:
  • 128 mm
Pakethöhe:
  • 136 mm
Verpackungseinheit
  • 25
warning-logo
WARNUNG

For California Residents Only:

Krebs und reproduktive Schäden https://www.p65warnings.ca.gov

Dieses Kit beinhaltet folgende Teile:

Teilenummer
Beschreibung
Menge
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3

Dieses Kit beinhaltet folgende Teile:

Dieser Montagesatz beinhaltet folgende Teile:

Typ
Teilenummer
Beschreibung
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.

Dieser Montagesatz beinhaltet folgende Teile:

  • Typ
    Kit
    Teilenummer
    #87297013A
    Beschreibung
    SATZ.
  • Typ
    Kit
    Teilenummer
    #87298615
    Beschreibung
    Satz.
  • Typ
    Kit
    Teilenummer
    #87298578
    Beschreibung
    SATZ.
  • Typ
    Kit
    Teilenummer
    #87298589
    Beschreibung
    SATZ.
  • Typ
    Kit
    Teilenummer
    #87298444
    Beschreibung
    SATZ.
  • Typ
    Kit
    Teilenummer
    #87297013
    Beschreibung
    Satz.
  • Typ
    Kit
    Teilenummer
    #87297008
    Beschreibung
    Satz.
  • Typ
    Kit
    Teilenummer
    #87298601
    Beschreibung
    SATZ.
  • Typ
    Kit
    Teilenummer
    #87298607
    Beschreibung
    SATZ.
  • Typ
    Kit
    Teilenummer
    #87298472
    Beschreibung
    SATZ.
  • Typ
    Kit
    Teilenummer
    #87298449
    Beschreibung
    SATZ.
  • Typ
    Kit
    Teilenummer
    #87298616
    Beschreibung
    SATZ.
  • Typ
    Kit
    Teilenummer
    #87298580
    Beschreibung
    SATZ.
  • Typ
    Kit
    Teilenummer
    #87298603
    Beschreibung
    SATZ.
  • Typ
    Kit
    Teilenummer
    #87297008A
    Beschreibung
    SATZ.
  • Typ
    Kit
    Teilenummer
    #87298476
    Beschreibung
    SATZ.
  • Typ
    Kit
    Teilenummer
    #87298586
    Beschreibung
    SATZ.
  • Typ
    Kit
    Teilenummer
    #87298618
    Beschreibung
    SATZ.
  • Typ
    Kit
    Teilenummer
    #87298617
    Beschreibung
    SATZ.
  • Typ
    Kit
    Teilenummer
    #87298602
    Beschreibung
    SATZ.
  • Typ
    Kit
    Teilenummer
    #87298574
    Beschreibung
    SATZ.
  • Typ
    Kit
    Teilenummer
    #87298604
    Beschreibung
    SATZ.

Keine Anwendbarkeit für aktuelles Produkt

    Prüfen Sie die Anwendbarkeit und greifen Sie auf technische Zeichnungen zu: #86532078

LIEFERINFORMATIONEN

Wählen Sie einen Händler aus, um die Lieferoptionen anzuzeigen

Menge

1
ZUM WARENKORB HINZUFÜGEN