84255700 - Ensemble de pièces de coupe - Lame 14 degrés - CASE IH
N° de pièce 84255700
INFO LIVRAISON
Rotary Disc Mower Knife #84255700 features a 14° twist. Our 14° twist knives are recommended for most crop conditions. The greater twist angle enables the knife’s cutting edge to cut closer to the ground and provide more lifting action to move the crop over the cutter bar and into the conditioner, producing a cleaner cut. The greater twist angle makes them more susceptible to rock damage.
• Twist: 14°
• Rotation: CCW
• Edge: Smooth
• Length: 116 mm
• Width: 50 mm
• Tip to Hole Center: 93 mm
• Bolt Hole Diameter: 22.6 mm
From raw material specification to the last production process, extra care has been taken to assure optimum performance and durability.
• The cutting edge is milled, not rolled, for improved sharpness. The milled edge does not extend past the bolt holes, for increased strength
• The new, radial-twist design improves lifting action for a smoother cut
• Disc knives are austempered for better impact absorption
Every production lot is tested against ISO specifications, then the manufacturing and testing processes are verified by stamping a traceable sequential number on each knife. In addition, tests are performed to satisfy standards that exceed ISO requirements.
• Incoming material is inspected, then tagged for traceability
• Bend tests are performed to guard against cracking
• Impact tests are used to check structural integrity
• Cross section analysis assures optimum metallurgical grain structure
Poids du paquet :
- 0.159 kg
Quantité package
- 1
Rotary Disc Mower Knife #84255700 features a 14° twist. Our 14° twist knives are recommended for most crop conditions. The greater twist angle enables the knife’s cutting edge to cut closer to the ground and provide more lifting action to move the crop over the cutter bar and into the conditioner, producing a cleaner cut. The greater twist angle makes them more susceptible to rock damage.
• Twist: 14°
• Rotation: CCW
• Edge: Smooth
• Length: 116 mm
• Width: 50 mm
• Tip to Hole Center: 93 mm
• Bolt Hole Diameter: 22.6 mm
From raw material specification to the last production process, extra care has been taken to assure optimum performance and durability.
• The cutting edge is milled, not rolled, for improved sharpness. The milled edge does not extend past the bolt holes, for increased strength
• The new, radial-twist design improves lifting action for a smoother cut
• Disc knives are austempered for better impact absorption
Every production lot is tested against ISO specifications, then the manufacturing and testing processes are verified by stamping a traceable sequential number on each knife. In addition, tests are performed to satisfy standards that exceed ISO requirements.
• Incoming material is inspected, then tagged for traceability
• Bend tests are performed to guard against cracking
• Impact tests are used to check structural integrity
• Cross section analysis assures optimum metallurgical grain structure
Cet ensemble comprend les pièces suivantes :
Numéro de pièce
Description
Qté
Cet ensemble comprend les pièces suivantes :
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Qté3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Qté3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Qté3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Qté3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Qté3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Qté3
Cet ensemble comprend les pièces suivantes :
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Qté3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Qté3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Qté3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Qté3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Qté3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Qté3
Ce kit comprend les pièces suivantes:
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
TypeKitNuméro de pièceDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
Aucune applicabilité pour le produit actuel
-
Nom du modèle -
APPLICABILITÉ DE L'ÉQUIPEMENT -
Type de produit -
Gamme produits
Vérifier l’applicabilité et accéder aux dessins techniques: #84255700
Designed to guarantee top performance in all weather conditions, choose Alternator #84141452 for your tractor and harvesting equipment
High Power
- New generation able to supply high eleltrical demand
- optimal charging speed at all temperatures
Maintenance Free
- Superior design to ensure long lifespan with zero maintenance
High Power
- New generation able to supply high eleltrical demand
- optimal charging speed at all temperatures
Maintenance Free
- Superior design to ensure long lifespan with zero maintenance
AVERTISSEMENT
For California Residents Only:
Cancérogène et toxique pour la reproduction https://www.p65warnings.ca.gov
Rotary Disc Mower Knife #84255700 features a 14° twist. Our 14° twist knives are recommended for most crop conditions. The greater twist angle enables the knife’s cutting edge to cut closer to the ground and provide more lifting action to move the crop over the cutter bar and into the conditioner, producing a cleaner cut. The greater twist angle makes them more susceptible to rock damage.
• Twist: 14°
• Rotation: CCW
• Edge: Smooth
• Length: 116 mm
• Width: 50 mm
• Tip to Hole Center: 93 mm
• Bolt Hole Diameter: 22.6 mm
From raw material specification to the last production process, extra care has been taken to assure optimum performance and durability.
• The cutting edge is milled, not rolled, for improved sharpness. The milled edge does not extend past the bolt holes, for increased strength
• The new, radial-twist design improves lifting action for a smoother cut
• Disc knives are austempered for better impact absorption
Every production lot is tested against ISO specifications, then the manufacturing and testing processes are verified by stamping a traceable sequential number on each knife. In addition, tests are performed to satisfy standards that exceed ISO requirements.
• Incoming material is inspected, then tagged for traceability
• Bend tests are performed to guard against cracking
• Impact tests are used to check structural integrity
• Cross section analysis assures optimum metallurgical grain structure
Poids du paquet :
- 0.159 kg
Quantité package
- 25
AVERTISSEMENT
For California Residents Only:
Cancérogène et toxique pour la reproduction https://www.p65warnings.ca.gov
Cet ensemble comprend les pièces suivantes :
Numéro de pièce
Description
Qté
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
Cet ensemble comprend les pièces suivantes :
Ce kit comprend les pièces suivantes:
Type
Numéro de pièce
Description
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
Ce kit comprend les pièces suivantes:
-
TypeKitNuméro de pièceDescriptionEnsemble complet de disques avec élévateurs - Torsion de 14°.
-
TypeKitNuméro de pièceDescriptionEnsembles de lames de 14° - 20 lames.
-
TypeKitNuméro de pièceDescriptionEnsembles de lames de 14° - 16 lames.
