Select All
Ref.
Qty
Part #
Description
Img
-
11HOUSING; Support Housing Assy., Includes: Ref. 2 & 3
-
21BEARING CUP 59.16mm OD x 11.81mm W; Cup, Tapered Roller Bearing
-
31BEARING CUP 65.08mm OD x 13.97mm W; Bearing, Cup
-
41CRANKSHAFT; Assy., Includes: Ref. 5
-
51PIN 25.4mm OD x 100.01mm L; Crank
-
61ROLLER BEARING 34.92mm ID x 18.29mm W; Bearing, Tapered Cone, 1-3/8'' ID x 23/32'' Wide, w/Seal
-
71BEARING CONE 31.75mm ID x 16.76mm W; Cone, Tapered Roller Bearing
-
71BEARING ASSY; Value, Cone Tapered Roller Bearing
-
81OIL SEAL; Seal, Oil
-
91SLOTTED NUT; Slotted, 1-1/4''-12
-
101PIN 1/8'' x 2'', Coiled; If replacing old style Spring Pins, 1/8'' x 1-1/4'' (3.175mm x 31.75mm), you must also replace Ref. 12, Special Washer, P/N 618086.
-
111PULLEY; Sheave Assy., Includes: Ref. 10 - pin
-
121WASHER 0.53'' ID x 1.31'' OD x 0.24'' Thk; 1/2'' ID x 1/4'' Thk.
-
131LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
141BOLT Hex, 1/2'' - 20 x 1 1/2'', Gr 5; Screw, Cap, HH, G5, 1/2''-20 x 1-1/2''
-
152SHIM .010'' Thk;
-
154SHIM .020'' Thk;
-
161PLATE; Support Plate Weld Assy., Front;Cotter Pin no longer required for Replacement Support Plate W.A., Ref. 16.
-
2CARRIAGE BOLT Sq Nk, 1/2'' - 13 x 1-1/2'', Gr 5, Full Thd; Bolt, Carriage, G5, 1/2''-13 x 1-1/2''
-
2LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
2NUT 1/2''-13, G5;
-
17ARSHIM .010'' Thk;
-
182WASHER 1.281'' ID x 2'' OD x .060'' Thk; Special
-
191WASHER 32.54mm ID x 50.8mm OD x 3.43mm Thk; Special, Plated
-
211PLATE; Rear;Component Of Ref. 41, Use Only If Kit Was Already Installed;When replacing Ref. 21 or Ref. 22 on machines built before 1984, you are required to replace both assemblies W/ Drive Plate Kit, P/N 784916 for service.;Components of Drive Plate, P/N 784916, Includes (1) each Ref. 21, 22, 37, 38, 40 & (3) Each Ref. 28 & 30.;When replacing Ref. 21 or Ref. 22 on machines built after beginning of 1984, it is recommended that you replace both assemblies W/Drive Plate Kit, P/N 784916 for service.
-
221PLATE; Front;Component Of Ref. 41, Use Only If Kit Was Already Installed;When replacing Ref. 21 or Ref. 22 on machines built before 1984, you are required to replace both assemblies W/ Drive Plate Kit, P/N 784916 for service.;Components of Drive Plate, P/N 784916, Includes (1) each Ref. 21, 22, 37, 38, 40 & (3) Each Ref. 28 & 30.;When replacing Ref. 21 or Ref. 22 on machines built after beginning of 1984, it is recommended that you replace both assemblies W/Drive Plate Kit, P/N 784916 for service.
-
232PIN 19.07mm OD x 136.65mm L; Weld Assy.
-
4LOCK WASHER 5/8'' ID x 0.634'' OD x .156'' Thk CST ZND; Washer, Lock, 5/8''
-
4NUT 5/8'' - 18, Gr 5; G5, 5/8''-18
-
2410SHIELD;
-
2510BEARING CUP 45.26mm OD x 12.06mm W; Cup, Tapered Roller Bearing
-
2610BEARING CONE 19.07mm ID x 16.64mm W; Cone, Tapered Roller Bearing
-
272CONNECTING LINK; Link, Pivot
-
4LUBE NIPPLE 90 Degree, 1/4'' NPT x 3/4'' L, Drive; NIPPLE, LUBE, 90?, 1/4'' NPT x .75'' lg, Drive
-
285JAM NUT Jam, 3/4''-16, G2; Jam, G2, 3/4''-16;Components of Drive Plate, P/N 784916, Includes (1) each Ref. 21, 22, 37, 38, 40 & (3) Each Ref. 28 & 30.
-
292BUSHING;
-
303WHEEL NUT; Wheel, 3/4''-16;Components of Drive Plate, P/N 784916, Includes (1) each Ref. 21, 22, 37, 38, 40 & (3) Each Ref. 28 & 30.
-
311CONNECTING LINK; Rod, Connecting
-
2LUBE NIPPLE 45 Degree, 1/4'' NPT x 4/5'' L, Drive; Fitting, Lube, 45?, 1/4''
-
322BEARING CUP 50.29mm OD x 10.67mm W; Cup, Tapered Roller Bearing
-
332BEARING CONE 25.4mm ID x 14.73mm W; Cone, Tapered Roller Bearing
-
342SHIELD;
-
351JAM NUT Slotted, 1'' - 14, Gr 2; Slotted, Jam, G2, 1''-14
-
371BOLT Hex, 1/2'' - 20 x 3'', Gr 5; Screw, Cap, HH, G5, 1/2''-20 x 3'';Components of Drive Plate, P/N 784916, Includes (1) each Ref. 21, 22, 37, 38, 40 & (3) Each Ref. 28 & 30.
-
1LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
1NUT Nut, 1/2-20 GR 5 ZND; G5, 1/2''-20
-
381SPLINED; Wedge, Drive Lock;Components of Drive Plate, P/N 784916, Includes (1) each Ref. 21, 22, 37, 38, 40 & (3) Each Ref. 28 & 30.
-
391SHIELD;
-
1WASHER 0.47'' ID x 0.92'' OD x 0.07'' Thk; SAE, 7/16''
-
1COTTER PIN 1/8'' x 3/4''; PIN, SPLIT (COTTER), 1/8'' x 3/4''
-
1BOLT Hex, 1/4''-20 x 1/2'', Gr 5; Screw, Cap, HH, G5, 1/4''-20 x 1/2''
-
1LOCK WASHER Ext Tooth, M6; Washer, Lock, Ext T, 1/4''
-
401NUT 1/2'' - 20; Hub Bolt, 1/2''-20;Components of Drive Plate, P/N 784916, Includes (1) each Ref. 21, 22, 37, 38, 40 & (3) Each Ref. 28 & 30.
-
41ARKIT; Plate, Drive, Includes: Ref's 21, 22, 28, 30, 37, 38 & 40
-
201COTTER PIN 1/4'' OD x 2'' L; Pin, Split (Cotter), 1/4'' x 2'';Cotter Pin no longer required for Replacement Support Plate W.A., Ref. 16.
-
361COTTER PIN 3/16'' OD x 1-1/2'' OAL; Pin, Split (Cotter), 3/16'' x 1 1/2''
Select All
Select
Ref.
1Qty
1Availability
Part #
65548Description
HOUSING; Support Housing Assy., Includes: Ref. 2 & 3Img
Select
Ref.
2Qty
1Availability
Part #
36723Description
BEARING CUP 59.16mm OD x 11.81mm W; Cup, Tapered Roller BearingImg
Select
Ref.
3Qty
1Availability
Part #
86516467Description
BEARING CUP 65.08mm OD x 13.97mm W; Bearing, CupImg
Select
Ref.
6Qty
1Availability
Part #
86052Description
ROLLER BEARING 34.92mm ID x 18.29mm W; Bearing, Tapered Cone, 1-3/8'' ID x 23/32'' Wide, w/SealImg
Select
Ref.
7Qty
1Availability
Part #
36726Description
BEARING CONE 31.75mm ID x 16.76mm W; Cone, Tapered Roller BearingImg
Select
Ref.
7Qty
1Availability
Part #
84356153GVDescription
BEARING ASSY; Value, Cone Tapered Roller BearingImg
Select
Ref.
10Qty
1Availability
Part #
280462Description
PIN 1/8'' x 2'', Coiled; If replacing old style Spring Pins, 1/8'' x 1-1/4'' (3.175mm x 31.75mm), you must also replace Ref. 12, Special Washer, P/N 618086.Img
Select
Ref.
11Qty
1Availability
Part #
130585Description
PULLEY; Sheave Assy., Includes: Ref. 10 - pinImg
Select
Ref.
12Qty
1Availability
Part #
86541779Description
WASHER 0.53'' ID x 1.31'' OD x 0.24'' Thk; 1/2'' ID x 1/4'' Thk.Img
Select
Ref.
13Qty
1Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Select
Ref.
14Qty
1Availability
Part #
88338Description
BOLT Hex, 1/2'' - 20 x 1 1/2'', Gr 5; Screw, Cap, HH, G5, 1/2''-20 x 1-1/2''Img
Select
Ref.
16Qty
1Availability
Part #
GI63881Description
PLATE; Support Plate Weld Assy., Front;Cotter Pin no longer required for Replacement Support Plate W.A., Ref. 16.Img
Select
Ref.
Qty
2Availability
Part #
280420Description
CARRIAGE BOLT Sq Nk, 1/2'' - 13 x 1-1/2'', Gr 5, Full Thd; Bolt, Carriage, G5, 1/2''-13 x 1-1/2''Img
Select
Ref.
Qty
2Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Select
Ref.
18Qty
2Availability
Part #
27696Description
WASHER 1.281'' ID x 2'' OD x .060'' Thk; SpecialImg
Select
Ref.
19Qty
1Availability
Part #
64972Description
WASHER 32.54mm ID x 50.8mm OD x 3.43mm Thk; Special, PlatedImg
Select
Ref.
21Qty
1Availability
Part #
784859Description
PLATE; Rear;Component Of Ref. 41, Use Only If Kit Was Already Installed;When replacing Ref. 21 or Ref. 22 on machines built before 1984, you are required to replace both assemblies W/ Drive Plate Kit, P/N 784916 for service.;Components of Drive Plate, P/N 784916, Includes (1) each Ref. 21, 22, 37, 38, 40 & (3) Each Ref. 28 & 30.;When replacing Ref. 21 or Ref. 22 on machines built after beginning of 1984, it is recommended that you replace both assemblies W/Drive Plate Kit, P/N 784916 for service.Img
Select
Ref.
22Qty
1Availability
Part #
784858Description
PLATE; Front;Component Of Ref. 41, Use Only If Kit Was Already Installed;When replacing Ref. 21 or Ref. 22 on machines built before 1984, you are required to replace both assemblies W/ Drive Plate Kit, P/N 784916 for service.;Components of Drive Plate, P/N 784916, Includes (1) each Ref. 21, 22, 37, 38, 40 & (3) Each Ref. 28 & 30.;When replacing Ref. 21 or Ref. 22 on machines built after beginning of 1984, it is recommended that you replace both assemblies W/Drive Plate Kit, P/N 784916 for service.Img
Select
Ref.
23Qty
2Availability
Part #
172391Description
PIN 19.07mm OD x 136.65mm L; Weld Assy.Img
Select
Ref.
Qty
4Availability
Part #
86729275Description
LOCK WASHER 5/8'' ID x 0.634'' OD x .156'' Thk CST ZND; Washer, Lock, 5/8''Img
Select
Ref.
25Qty
10Availability
Part #
36725Description
BEARING CUP 45.26mm OD x 12.06mm W; Cup, Tapered Roller BearingImg
Select
Ref.
26Qty
10Availability
Part #
36724Description
BEARING CONE 19.07mm ID x 16.64mm W; Cone, Tapered Roller BearingImg
Select
Ref.
Qty
4Availability
Part #
87415Description
LUBE NIPPLE 90 Degree, 1/4'' NPT x 3/4'' L, Drive; NIPPLE, LUBE, 90?, 1/4'' NPT x .75'' lg, DriveImg
Select
Ref.
28Qty
5Availability
Part #
87313Description
JAM NUT Jam, 3/4''-16, G2; Jam, G2, 3/4''-16;Components of Drive Plate, P/N 784916, Includes (1) each Ref. 21, 22, 37, 38, 40 & (3) Each Ref. 28 & 30.Img
Select
Ref.
30Qty
3Availability
Part #
143517Description
WHEEL NUT; Wheel, 3/4''-16;Components of Drive Plate, P/N 784916, Includes (1) each Ref. 21, 22, 37, 38, 40 & (3) Each Ref. 28 & 30.Img
Select
Ref.
Qty
2Availability
Part #
87569Description
LUBE NIPPLE 45 Degree, 1/4'' NPT x 4/5'' L, Drive; Fitting, Lube, 45?, 1/4''Img
Select
Ref.
32Qty
2Availability
Part #
132709Description
BEARING CUP 50.29mm OD x 10.67mm W; Cup, Tapered Roller BearingImg
Select
Ref.
33Qty
2Availability
Part #
132710Description
BEARING CONE 25.4mm ID x 14.73mm W; Cone, Tapered Roller BearingImg
Select
Ref.
35Qty
1Availability
Part #
603373Description
JAM NUT Slotted, 1'' - 14, Gr 2; Slotted, Jam, G2, 1''-14Img
Select
Ref.
37Qty
1Availability
Part #
88849Description
BOLT Hex, 1/2'' - 20 x 3'', Gr 5; Screw, Cap, HH, G5, 1/2''-20 x 3'';Components of Drive Plate, P/N 784916, Includes (1) each Ref. 21, 22, 37, 38, 40 & (3) Each Ref. 28 & 30.Img
Select
Ref.
Qty
1Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Select
Ref.
38Qty
1Availability
Part #
605205Description
SPLINED; Wedge, Drive Lock;Components of Drive Plate, P/N 784916, Includes (1) each Ref. 21, 22, 37, 38, 40 & (3) Each Ref. 28 & 30.Img
Select
Ref.
Qty
1Availability
Part #
87363Description
WASHER 0.47'' ID x 0.92'' OD x 0.07'' Thk; SAE, 7/16''Img
Select
Ref.
Qty
1Availability
Part #
80756Description
COTTER PIN 1/8'' x 3/4''; PIN, SPLIT (COTTER), 1/8'' x 3/4''Img
Select
Ref.
Qty
1Availability
Part #
88542Description
BOLT Hex, 1/4''-20 x 1/2'', Gr 5; Screw, Cap, HH, G5, 1/4''-20 x 1/2''Img
Select
Ref.
Qty
1Availability
Part #
85700573Description
LOCK WASHER Ext Tooth, M6; Washer, Lock, Ext T, 1/4''Img
Select
Ref.
40Qty
1Availability
Part #
29790Description
NUT 1/2'' - 20; Hub Bolt, 1/2''-20;Components of Drive Plate, P/N 784916, Includes (1) each Ref. 21, 22, 37, 38, 40 & (3) Each Ref. 28 & 30.Img
Select
Ref.
41Qty
ARAvailability
Part #
784916Description
KIT; Plate, Drive, Includes: Ref's 21, 22, 28, 30, 37, 38 & 40Img
Select
Ref.
20Qty
1Availability
Part #
88182Description
COTTER PIN 1/4'' OD x 2'' L; Pin, Split (Cotter), 1/4'' x 2'';Cotter Pin no longer required for Replacement Support Plate W.A., Ref. 16.Img
Select
Ref.
36Qty
1Availability
Part #
80754Description
COTTER PIN 3/16'' OD x 1-1/2'' OAL; Pin, Split (Cotter), 3/16'' x 1 1/2''Img