87298444 - SATZ - MILLER

Teilenummer 87298444

Passt dieses Teil zu meiner Maschine

LIEFERINFORMATIONEN

Bitte einen Händler auswählen, um die Lieferoptionen anzuzeigen

Complete Disc Assembly Kit #87298444 features a complete set of "V" knives. Our "V" knives are recommended for rocky conditions where excessive knife bending is a concern. Their cutting quality is not as good as twisted knives, but they have greater resistance to bending when they come into contact with foreign objects.

• "V" Rock Blades
• Edge: Smooth
• Ready to install on disc mower gear boxes
• Painted and boxed
• Includes a complete disc assembly with lifters

From raw material specification to the last production process, extra care has been taken to assure optimum performance and durability.

• The cutting edge is milled, not rolled, for improved sharpness. The milled edge does not extend past the bolt holes, for increased strength
• The new, radial-twist design improves lifting action for a smoother cut
• Disc knives are austempered for better impact absorption

Every production lot is tested against ISO specifications, then the manufacturing and testing processes are verified by stamping a traceable sequential number on each knife. In addition, tests are performed to satisfy standards that exceed ISO requirements.

• Incoming material is inspected, then tagged for traceability
• Bend tests are performed to guard against cracking
• Impact tests are used to check structural integrity
• Cross section analysis assures optimum metallurgical grain structure

Paketgewicht:
  • 6.395 kg
Verpackungseinheit
  • 1


• "V" Rock Blades
• Edge: Smooth
• Ready to install on disc mower gear boxes
• Painted and boxed
• Includes a complete disc assembly with lifters

From raw material specification to the last production process, extra care has been taken to assure optimum performance and durability.

• The cutting edge is milled, not rolled, for improved sharpness. The milled edge does not extend past the bolt holes, for increased strength
• The new, radial-twist design improves lifting action for a smoother cut
• Disc knives are austempered for better impact absorption

Every production lot is tested against ISO specifications, then the manufacturing and testing processes are verified by stamping a traceable sequential number on each knife. In addition, tests are performed to satisfy standards that exceed ISO requirements.

• Incoming material is inspected, then tagged for traceability
• Bend tests are performed to guard against cracking
• Impact tests are used to check structural integrity
• Cross section analysis assures optimum metallurgical grain structure">Complete Disc Assembly Kit #87298444 features a complete set of "V" knives. Our "V" knives are recommended for rocky conditions where excessive knife bending is a concern. Their cutting quality is not as good as twisted knives, but they have greater resistance to bending when they come into contact with foreign objects.

• "V" Rock Blades
• Edge: Smooth
• Ready to install on disc mower gear boxes
• Painted and boxed
• Includes a complete disc assembly with lifters

From raw material specification to the last production process, extra care has been taken to assure optimum performance and durability.

• The cutting edge is milled, not rolled, for improved sharpness. The milled edge does not extend past the bolt holes, for increased strength
• The new, radial-twist design improves lifting action for a smoother cut
• Disc knives are austempered for better impact absorption

Every production lot is tested against ISO specifications, then the manufacturing and testing processes are verified by stamping a traceable sequential number on each knife. In addition, tests are performed to satisfy standards that exceed ISO requirements.

• Incoming material is inspected, then tagged for traceability
• Bend tests are performed to guard against cracking
• Impact tests are used to check structural integrity
• Cross section analysis assures optimum metallurgical grain structure

Dieses Kit beinhaltet folgende Teile:

Teilenummer
Beschreibung
Menge
  • 80700
    Unterlegscheibe - 0,56" ID x 1,38" AD x 0,11" Dicke
    2

Dieses Kit beinhaltet folgende Teile:

  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3

Dieses Kit beinhaltet folgende Teile:

  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3

Dieser Montagesatz beinhaltet folgende Teile:

Typ
Teilenummer
Beschreibung

Dieser Montagesatz beinhaltet folgende Teile:

  • Typ
    Kit
    Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Typ
    Kit
    Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Typ
    Kit
    Teilenummer
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Typ
    Kit
    Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Typ
    Kit
    Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Typ
    Kit
    Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.

Keine Anwendbarkeit für aktuelles Produkt

    Prüfen Sie die Anwendbarkeit und greifen Sie auf technische Zeichnungen zu: #87298444

  • Modellname
  • ANWENDUNG
  • Produkttyp
  • Produktlinie

Designed to guarantee top performance in all weather conditions, choose Alternator #84141452 for your tractor and harvesting equipment

High Power
  • New generation able to supply high eleltrical demand
  • optimal charging speed at all temperatures
Maintenance Free
  • Superior design to ensure long lifespan with zero maintenance
High Power
  • New generation able to supply high eleltrical demand
  • optimal charging speed at all temperatures
Maintenance Free
  • Superior design to ensure long lifespan with zero maintenance
warning-logo
WARNUNG

For California Residents Only:

Krebs und reproduktive Schäden https://www.p65warnings.ca.gov

Complete Disc Assembly Kit #87298444 features a complete set of "V" knives. Our "V" knives are recommended for rocky conditions where excessive knife bending is a concern. Their cutting quality is not as good as twisted knives, but they have greater resistance to bending when they come into contact with foreign objects.

• "V" Rock Blades
• Edge: Smooth
• Ready to install on disc mower gear boxes
• Painted and boxed
• Includes a complete disc assembly with lifters

From raw material specification to the last production process, extra care has been taken to assure optimum performance and durability.

• The cutting edge is milled, not rolled, for improved sharpness. The milled edge does not extend past the bolt holes, for increased strength
• The new, radial-twist design improves lifting action for a smoother cut
• Disc knives are austempered for better impact absorption

Every production lot is tested against ISO specifications, then the manufacturing and testing processes are verified by stamping a traceable sequential number on each knife. In addition, tests are performed to satisfy standards that exceed ISO requirements.

• Incoming material is inspected, then tagged for traceability
• Bend tests are performed to guard against cracking
• Impact tests are used to check structural integrity
• Cross section analysis assures optimum metallurgical grain structure

Paketgewicht:
  • 6.395 kg
Verpackungseinheit
  • 1
warning-logo
WARNUNG

For California Residents Only:

Krebs und reproduktive Schäden https://www.p65warnings.ca.gov

Dieses Kit beinhaltet folgende Teile:

Teilenummer
Beschreibung
Menge
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3

Dieses Kit beinhaltet folgende Teile:

  • Teilenummer
    80700
    Beschreibung
    Unterlegscheibe - 0,56" ID x 1,38" AD x 0,11" Dicke.
    Menge
    2

Dieser Montagesatz beinhaltet folgende Teile:

Typ
Teilenummer
Beschreibung
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.

Dieser Montagesatz beinhaltet folgende Teile:

Keine Anwendbarkeit für aktuelles Produkt

    Prüfen Sie die Anwendbarkeit und greifen Sie auf technische Zeichnungen zu: #87298444

LIEFERINFORMATIONEN

Wählen Sie einen Händler aus, um die Lieferoptionen anzuzeigen

Menge

1
ZUM WARENKORB HINZUFÜGEN